Load data for .35 Rem. + .358 | 250gr | Hornady InterLock SP-RP

Recommended Powder(s): Norma 200, Vihtavuori N120

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.358 \| 250gr \| Hornady InterLock SP-RP
Manufacturer SKU:	3520
Bullet Weight:	250gr \| 16.2g
Bullet Diameter:	0.358" \| 9.09mm
Bullet Length:	1.302" \| 33.1mm
Caliber:	.35 Rem. load data
Case Length (l3):	1.920" \| 48.8mm
Cartridge Length (C.O.L.):	2.487" \| 63.2mm
Seated Depth:	0.735" \| 18.7mm
Shank Seated Depth:	0.735" \| 18.7mm
Case Capacity:	51.0 Grains of Water \| 3.31 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	39885 psi \| 2750 bar
LID:	LID_B2799_C483
Last updated:	2025-01-01

Load data for 38 loads in caliber .35 Rem. with .358 | 250gr | Hornady InterLock SP-RP bullet and 19 powders such as Norma 200, Vihtavuori N120. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	89%	35128	88%	**47	100%
[ADI AR 2219]*	<<locked>>	92%	35737	90%	**67	94%
Accurate 2015	<<locked>>	96%	32213	81%	**18	96%
[Accurate 2495]*	<<locked>>	97%	24004	60%	**52	92%
Alliant AR-Comp	<<locked>>	97%	29892	75%	**08	97%
Alliant Reloder-10x	<<locked>>	95%	35259	88%	**77	98%
Alliant Reloder-7	<<locked>>	87%	35708	90%	**21	98%
Baschieri & Pellagri 106	<<locked>>	91%	35781	90%	**01	95%
[Hodgdon H322]*	<<locked>>	96%	33417	84%	**27	93%
[Hodgdon H335]*	<<locked>>	93%	35099	88%	**60	92%
[Hodgdon H4198]*	<<locked>>	88%	35679	89%	**72	94%
IMR 4198	<<locked>>	91%	34911	88%	**08	98%
Norma 200 👍	<<locked>>	92%	35418	89%	**70	98%
SNPE Vectan BA6 1/2	<<locked>>	85%	35897	90%	**73	100%
[SNPE Vectan SP 10]*	<<locked>>	93%	35752	90%	**77	93%
[Somchem S335]*	<<locked>>	97%	30153	76%	**45	92%
Vihtavuori N120 👍	<<locked>>	91%	35650	89%	**27	100%
Vihtavuori N130	<<locked>>	96%	34853	87%	**18	97%
[Vihtavuori N133]*	<<locked>>	97%	29486	74%	**16	94%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	27630	69%	**19	99%
[ADI AR 2219]*	<<locked>>	85%	28558	72%	**32	90%
[Accurate 2015]*	<<locked>>	87%	23873	60%	**50	92%
[Accurate 2495]*	<<locked>>	94%	21524	54%	**90	90%
[Alliant AR-Comp]*	<<locked>>	88%	23322	58%	**50	93%
[Alliant Reloder-10x]*	<<locked>>	82%	23641	59%	**50	93%
Alliant Reloder-7	<<locked>>	81%	29341	74%	**13	96%
[Baschieri & Pellagri 106]*	<<locked>>	83%	27717	69%	**50	91%
[Hodgdon H322]*	<<locked>>	91%	28558	72%	**32	90%
[Hodgdon H335]*	<<locked>>	89%	30966	78%	**85	90%
[Hodgdon H4198]*	<<locked>>	81%	29312	73%	**60	91%
IMR 4198	<<locked>>	82%	27093	68%	**57	95%
Norma 200	<<locked>>	81%	25599	64%	**86	95%
SNPE Vectan BA6 1/2	<<locked>>	82%	33591	84%	**44	100%
[SNPE Vectan SP 10]*	<<locked>>	88%	30487	76%	**81	90%
[Somchem S335]*	<<locked>>	94%	27427	69%	**93	90%
Vihtavuori N120	<<locked>>	81%	26455	66%	**67	99%
[Vihtavuori N130]*	<<locked>>	86%	26107	65%	**57	94%
[Vihtavuori N133]*	<<locked>>	92%	25933	65%	**44	92%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data